n/a
1
Kusters Pad Steam Dye consisting of:
A) Tension Stand
B) 84 Wide Scray, with #45 Guiders, 18 wide
C) Kusters Model 235.03-56 Wash box, 84 wide, S/N M26340.03, year 1996
D) Kusters Model 222.11KS2S.13 Dye Pad, S/N M26340.04, year 1997, 84 wide, with (2) expandable rolls and console
E) Kusters 6-Section Stainless Steel Steamer, 84 wide (Section 1 is horizontal 3-pass and Sections 2-6 are vertical 12-pass each)
F) Kusters Rubber/Stainless Nip, 84 wide, 5 ton, pneumatic
G) (7) Kusters Stainless Enclosed Wash Boxes, double lace, 84 wide, with a rubber/stainless nip between each one, 12 diameter, pneumatic, 5 ton
H) 60 Dry Cans, 5 sections of 12 cans each, 84 wide x 23 diameter x 75 psi, with syphons, joints, traps and v-belt pulleys
I) Hunter Lab Model Spectraprobe XE Color Management System, with desktop computer
J) Menzel J-Scray, 86 wide, tubular/stainless steel, with Guider Specialty guides, 18 wide
K) Menzel Model 72SBE A-Frame Wind-Up, 90 wide, with (2) inspection stations
L) Lot of Solid State Controls, mounted in modular building
M) All Motors and Controls
n/a
1
Morrison Sanforizer (No. 1), consisting of:
A) Roll Let-Off
B) 76 Wide Stainless Steel Scray
C) Tension Bar
D) Set of Air Guiders
E) Cole Spray, 80 wide
F) Morrison Rubber Belt Cylinder, 84 wide, belt is 74-1/2, S/N 355
G) Palmer Section, double drum, 1st cylinder 80 wide x 84 diameter, 2nd drum is 80 wide x 48 diameter, felt blanket is 76 wide
H) (3) Cooling Cans, 80 wide x 23 diameter
I) J-Scray
J) Set of Air Guides
K) A-Frame Surface Winder or Plaitor
L) Line Shaft Drive, with motors and controls
n/a
1
Set of Lafer Tandem Duplex Nappers consisting of:
A) Napper M-72, Model Gri-90, 80 wide, year 1997, 24-roll, with both hook and straight wire, S/N 948134, with a set of Tandematic plate guides
B) Napper M-73, Model Gri-90, 80 wide, year 1997, 24-roll, with both hook and straight wire, S/N 955670, with (2) sets of Tandematic plate guides, (4) bag collection, (2) cameras and monitors
C) This particular machine is set up with turning bars to do tubular fabric, fabric enters from M-72 and exits through M-72 with an overhead plaitor
n/a
1
Napper consisting of:
A) Napper M-78, Model Gri-90 24/36 Gri90SINGOLO, S/N 13031, year 1997
B) Napper M-79, Model Gri-90 Gri90SINGOLO, S/N 13032, year 1997
C) M-78 & M-79 are two Lafer Nappers in tandem, fabric enters from M-78, entry has a set of Tandematic plate guides, 80 wide, 24-roll, with straight and hook wire, compensator between the two nappers, tension bar, goes through a set of Tandematic plate guides and onto the other napper, which is also 24-roll, 80 wide, exits with a plaitor, with collection bag
D) Spare (24) 80 wide napper rollers
n/a
1
Morrison Sanforizer (No. 4), consisting of:
A) A-Frame Unwind
B) Stainless Steel Tubular Scray, 87 wide
C) Tension Bar
D) Set of Guider Specialty 18 Air Guiders
E) Cole Spray Unit, 80 wide
F) Morrison 84 Wide Rubber Belt Section, rubber belt is 74 wide, S/N 181, year 1992
G) Morrison Palmer Section, 80 wide x 84 diameter, blanket is 72 wide
H) Additional 2 Heated Cans, 80 wide x 23 diameter
I) Additional 3 Cooling Cans, 80 wide x 23 diameter
J) Tubular Stainless Steel Scray, 80 wide
K) Set of Guider Specialty 18 Air Guiders
L) Surface Winder, 80 wide
M) D.C. Motor Drive
n/a
1
American Baler, Model C-30, horizontal, hydraulic, makes a 30 x 30 bale. With condensor
n/a
1
Kusters Type 222.11K25-12 Dye Pad, 86 wide, S/N M26340, year 1997, with (2) expandable rolls and console, AC inverter motor
n/a
1
Marshall & Williams Clip Type Tenter Frame, Year 1994, Model 2000, S/N 31946, 78 max. chain width x 90 long, pre-fab rails and 2000 M&W high speed chain, gas fired low profile oven, 12 wide x 80 long x 6 tall, 8 zone, (16) 15 HP blower motors (8 per side), (8) gas burners (4 per side), (10) exhausts
n/a
2
Inspection Retuber Machine, 80 wide, each consisting of:
A) Tubing Bar Let-Off
B) Lighted Inspection Board
C) Tubing Bar Take-Up for 80 fabric
D) Trumeters
E) Air Clutch, with tension device, will make a 20 diameter roll
F) Variable Drive with forward and reverse
n/a
1
Cooling Can Section, with (8) water chilled dry cans, 84 face x 23 diameter, with syphons and joints
n/a
1
Inspection Re-Roll Machine 72 Wide, consisting of:
A) Tube to Tube
B) Operators Platform
C) Edge Guide Device
D) Forward/Reverse
E) Trumeter
F) Hydraulic Lift Table to put the fabric on the tube
n/a
1
Atlas Copco Model GA160 Water Cooled Rotary Screw Air Compressor, S/N AIF052528, year 1999, 200 HP, with vertical air receiver tank, with (2) Wilkerson Model WRD-1250W-5 Refrigerated Air Dryers, S/N 955-01-27-1999-4896 and 955-091-27-1999-4895, year 1999, R22 refrigerant (62,170 hrs)
n/a
1
Cavitec Powder Coating Machine, year 2002, consisting of:
A) Yale 1-Ton Electric Hoist
B) Metal Let-Off Table, 120 wide x 190 long
C) 2-Roll Unwinding Cradle, 130 wide
D) Railway Sewing Machine, with (2) heads, 140 wide
E) Menzel Tubular Scray, Type 138SCO121, year 2002, 138 wide
F) Mahlo Straightener, 142 wide, with (6) optical eyes, Type RFMC-10A, # 2568631520, year 2003
G) Mahlo Straightener, 80 wide, with (4) optical eyes
H) E&L Driven Scroll Roll, 140 wide, with E&L slat roll expander, 140 wide
I) Operators Platform
J) Pup Tenter, Type CAVISCAT-PLANT, year 2002, Order No. PSI00039073, 300cm working width, 350kw, with E&L optical rail guides, Type FR5502, pinning brushes, over and under rail, 30 long, (2) steam boxes, 36 wide x 3 meters wide
K) Cavitec Powder Coater
L) Infrared Oven, 10 long x 3 meters wide, with infrared heaters
M 4 Chilled Rolls, 138 wide, (1) roll is 12 diameter, (2) rolls are 16 diameter, 4th roll is a rubber roll 12 diameter
N) Budzar Chiller, operates with compressed air
O) 2 Center Wind Let-Offs
P) Operators Platform
Q) Menzel Tubular Scray, Type 138SCO2470, year 2002, 138 wide
R) 4-Roll Beater Roll above scray, 80 wide, with collection box
S) Orthomat Mahlo Straightener, 142 wide, with (6) optical eyes, Type RFMC-10A, # 25686310806, year 2003
T) 2-Roll Surface Winder, 140 wide
U) A/C Inverter Drive
n/a
1
Kusters Pad Steam Dye consisting of:
A) Tension Stand
B) 84 Wide Scray, with #45 Guiders, 18 wide
C) Kusters Model 235.03-56 Wash box, 84 wide, S/N M26340.03, year 1996
D) Kusters Model 222.11KS2S.13 Dye Pad, S/N M26340.04, year 1997, 84 wide, with (2) expandable rolls and console
E) Kusters 6-Section Stainless Steel Steamer, 84 wide (Section 1 is horizontal 3-pass and Sections 2-6 are vertical 12-pass each)
F) Kusters Rubber/Stainless Nip, 84 wide, 5 ton, pneumatic
G) (7) Kusters Stainless Enclosed Wash Boxes, double lace, 84 wide, with a rubber/stainless nip between each one, 12 diameter, pneumatic, 5 ton
H) 60 Dry Cans, 5 sections of 12 cans each, 84 wide x 23 diameter x 75 psi, with syphons, joints, traps and v-belt pulleys
I) Hunter Lab Model Spectraprobe XE Color Management System, with desktop computer
J) Menzel J-Scray, 86 wide, tubular/stainless steel, with Guider Specialty guides, 18 wide
K) Menzel Model 72SBE A-Frame Wind-Up, 90 wide, with (2) inspection stations
L) Lot of Solid State Controls, mounted in modular building
M) All Motors and Controls
n/a
2
Stahle/Eltex Yarn Heat Set Machines, Model HBS-T, 4 lane bulk yarn heat set oven, S/N 2772 (year 1999), 2821 (year 2000), equipped with 4 position front loading creel, 4 position end winder (2°2 cone, 11 traverse)
n/a
1
Comet "Orion" Shear 86" wide, model 2000, year 1995, #C1146, Corino Guider with pivot bar.
n/a
1
Tank, dimpled jacketed, 200 gallon, 42-1/2 dia. x 33 deep dish bottom, 1-1/2 center drain, 15 legs, rinse ring, steam jacket 35 PSI, lid, 1 HP 230/460 volt mixer
n/a
1
Fiberglass Tank, 6000 Gallon 8 diameter x 20 long, has cradle and legs, then it can be mounted in the air
n/a
1
SSM Digicone Winder, Model MDF, S/N 8320354/95, year 1995, Mfg. No. 418/8787/8810, set up for dye cones (2°2, 10 traverse, 11 cone), 48 spindles (24 for cones & 24 for tubes), with Loepfe clearers
n/a
1
SSM Digicone Winder, Model MDF400, S/N 832.0450/97, year 1997, Mfg. No. 538/12240-12255, 24 spindles, set up to wind 6 dye tube x 54mm diameter, with Loepfe clearers
n/a
1
SSM Digicone Winder, Model MZF-400, S/N 832.048097, year 1997, Mfg. No. 559/12940-12963, 36 spindles, (2°2, 10 traverse, 11 cone), with Loepfe clearers
n/a
1
SSM Digicone Winder, Model MDF-400, S/N 832.0177/93, year 1993, Mfg. No. 262/4214-4261, 48 spindles, with Loepfe clearers (2°2, 10 traverse, 11 cone), with Loepfe clearers
n/a
1
SSM Digicone Winder, Model MZF-400, S/N 832.0479/97, year 1997, Mfg. No. N/A, 36 spindles, all cones (2°2, 10 traverse, 11 cone), with Loepfe clearers
n/a
1
Uster Tensorapid III, automatic tensile tester for yarn strength Type UTR3-SP, Manufacture Number 4714.1712, year 1997, yarn creel, signal processor and printer
n/a
1
SSM Digicone Winder, Model MDF-400, S/N 832.0178/93, year 1993, Mfg. No. 2663/4282-4309, 48 spindles, (cones) (2°2, 10 traverse, 11 cone), with Loepfe clearers
n/a
1
SSM Digicone Winder, Model MDF-400, S/N 832.0296/95, year 1995, Mfg. No. 363/7243-7266, 32 spindles, (24 cones/8 tubes) (6 dye tube x 54mm diameter), with Loepfe clearers
n/a
1
Railway Sewing Machine 140" wide, s/n 247995, with Merrow head 70-D3B-2
n/a
1
Dry Can Range #3 (W5) totally enclosed with aluminum doors and galvanized hood consisting of:
- Scutcher: 3 HP 575 volt AC motor, 80" face, (2) SS cloth guide rollers, 2 Beaters, 2 Scroll rolls
- Padder: 15-Ton Morrison T-624 with 10 HP 240 volt DC motor, (1) 80" wide x 18" diameter SS roll, (1) 80" wide x 18" diameter rubber roll, Small SS pan, (1) SS submersible roll
- Cans: 10 HP 240 volt DC motor, 5 HP 240 volt DC motor, (8) Belt driven stacks of 12 cans each Total 96 cans, 80" wide x 23" OD 100 psi cans
- Folder: 3 HP 180 volt DC motor, 42" swing, (1) 81" wide x 12" diameter rubber drive roll, (1) 72" wide x 5" diameter SS idle roll, (5) 80" wide carry rolls (1) Compensator
- Operator station
n/a
21
Lonati Single Cylinder Sock Knitting Machine, Model 454J, Year 1999, 4 diameter cylinder, (108) needles, 9 gauge, (4) Feed Drumless Fully Electronic, (2) colors per course patterning capability plus base yarn, Internal Bryson Stop Motion System, (25) End BTSR Sensors, 220 volts/3 phase/60 cycle Volt Power, No Vacuum Motor
SERIAL NUMBERS: 28932, 28933, 28571, 28582, 28587, 28951, 28959, 28960, 28379, 28380, 28381, 28556, 28557, 28561, 28563, 28564, 28566, 28568, 28569, 28570, 28575
n/a
39
Lonati Single Cylinder Sock Knitting Machine, Model 454J, Year 2000, 4 diameter cylinder, (108) needles, 9 gauge, (4) Feed Drumless Fully Electronic, (2) colors per course patterning capability plus base yarn, Internal Bryson Stop Motion System, (25) End BTSR Sensors, 220 volts/3 phase/60 cycle Volt Power, No Yarn Rack, No Vacuum Motor
SERIAL NUMBERS: 29296, 29228, 29294, 29259, 29312, 29213, 29314, 29315, 29316, 29318, 29319, 29321, 29321, 29324, 29325, 29327, 29332, 29333, 29334, 29233, 29251, 29255, 29257, 29258, 29260, 29261, 29262, 29263, 29264, 29265, 29268, 29281, 29283, 29284, 29286, 29287, 29288, 29289, 29290
n/a
3
Lonati Single Cylinder Sock Knitting Machine, Model 474J, Year 1999, 3½ diameter cylinder, (84) needle, 9 gauge, (4) Feed Drumless Fully Electronic, (2) colors per course patterning capability plus base yarn, Internal Bryson Stop Motion System, (25) End BTSR Sensors, 220 volts/3 phase/60 cycle, No Yarn Creels, No Vacuum Motor
SERIAL NUMBERS: 29627, 29628, 29629
n/a
3
Biancalani Air Flow Machines, Model Airo, Type S, year 1997, 2 chamber, natural gas, lint collection system
1 Mill No. 7, S/N A970447
1 Mill No. 6, S/N A970461
1 Mill No. 5, S/N A970445
n/a
1
Jemco Tube Turner #3 consisting of:
A) Cradle Let-Off, 50 wide, driven
B) Jemco Tube Turner, Model J1010, S/N EP119024, Length of tube 208 long, 8 diameter, 25 HP motor
n/a
1
Jemco Tube Turner #4 consisting of:
A) Cradle Let-Off, 50 wide, driven
B) Jemco Tube Turner, Model J1010, S/N TT119024, Length of tube 209 long, 6 diameter, 25 HP motor
n/a
1
Jemco Tube Turner #5 consisting of:
A) Cradle Let-Off, 50 wide, driven
B) Jemco Tube Turner, Model J1010, S/N 492100-TT, Length of tube 210 long, 8 diameter, 25 HP motor
n/a
1
Jemco Tube Turner #6 consisting of:
A) Cradle Let-Off, 50 wide, driven
B) Jemco Tube Turner, Model J1010, S/N 78627, Length of tube 210 long, 10 diameter, 25 HP motor
n/a
1
Jemco Tube Turner #7 consisting of:
A) Cradle Let-Off, 50 wide, driven
B) Jemco Tube Turner, Model J1010, S/N TT119024, Length of tube 210 long, 10 diameter, 25 HP motor
n/a
1
Zonco Machine to scour soften and dry woven & knitted fabrics in rope form, 2-section, Model EOLO, S/N 95.97.16, year 1998, with gas fired burner at exit for burning off all the pilling waste after scouring and washing, with computer controls, driven entrance and exit. 400V A/C / 60 / 3, absorbed power 61 KW, current intensity 140A, exit power 45 Hp. Heating elements power 400 KW, min. pressure air 500 KPA. Max. pressure air 800 KPA. FAB/Mfg. Zonco Federico, type: Secheclee, 120V/5 Amp 1,200,000 BTU per hour.
n/a
1
Needle Punch Line year 2002, consisting of:
A) Loading Table, 5 wide x 168 wide
B) 1-Ton Electrict Hoist on rail
D) 4-Roll Cradle, split into 2 segments, 72 wide each, rolls are 10 diameter
E) 2 Sets of E&L Driven Spreader Rolls, with E&L slat expander
F) Fehrer T2MC Downstroke Needle Punch, Model NL21/S, S/N 501, 3.6 meters wide, year 2002, needle pattern: 2 x 6000 needles/lin.m., stroke amplitude: 40mm, stroke frequency: 1900 rpm, passage speed: 4-40 m/min., however, it is set up to run (2) 75 pieces
G) Quick exchange device for the bed plate
H) Quick exchange device for the stripper plate
I) Right hand side operation with a PLC Allen Bradley control, 525 690 volt, 60 cycle
*** Needle boards of Mg/Al-alloy with PU-coating on the bottom side of the board, holes for 15 gauge needles
J) Deflection roller with drive
K) Split outlet roller
L) Dust suction device
M) 2-Scrays
N) 2- 2 Independent take-ups
O) Control Panel
n/a
1
Murata Winder- Backwinder Set up for staple poly yarn with oil application attached, Type 7-5, year 1996, S/N 95SX323400, 50 spindles, SS drums, 3 deg. 51 cone take-up, has wax attachment, 480 volts, no clearers, automatic for feed package
n/a
1
Zimmer Modification for Open Bearing machine:
Modification of 12 print stations to version CAN-BUS, including hardware and software, including CAN-BUS distributor. Also including new pneumatic screen tension units with individual screen drive and length repeat system, motorized cross and diagonal repeat, as below:
- 12 modification sets for existing printing stations
- Computer control system APR Plus
- Rotor washer blanket washing device
Specification of supply and services:
12 screen tension units size I for repeat 64 cm up to 120,6 cm with height adjustment, including one-step lifting device for color pipe and screen at full tooth engagement
12 digital screen drives with servo motor and motorized longitudinal repeat adjustment
12 motors for cross repeat adjustment
12 motors for diagonal repeat adjustment
12 screen tensioning systems through tension claws, pneumatically operated
12 control devices to determine screen position in length repeat direction
12 control devices to determine screen position in cross repeat direction
12 control devices to determine screen position in diagonal repeat direction
all repeat adjustments with foil covered keyboards
stepless friction control, electronically controlled
one main switchboard completely wired and installed in climatized execution
one computer control system APR Plus including Flying Change Modus
Technical description of APR-PLUS Control System
HARDWARE:
- Industrial PC for visualization of the production process, analysis and memorizing of designs with:
- robust Flashdisk for unlimited design storage possibility by flashdisk change
- Touchscreen flat display with colour TFT, 12 diagonal
- input over Popup-keyboard on the touchscreen
- Ethernet interface
EMC optimized slot rack for
- machine control
- control of length-repeat-drive
- PLC control, according to IEC 1131-3 Norm
- communication operation terminal and CAN BUS
Repeat Gears
6 ea. Repeat gears size 27
6 ea. Repeat gears size 36
Colorpipes 1850mm (72) print width:
12 ea. Colorpipes Type KR-S1-MHL-Kufstein including
Knurled Magnet rods, 8,10,12,15, and 20mm
One Rotor Washer Blanket Washing Device
One Printing Blanket Guiding System
n/a
2
Octir Industries S.P.A. Turbocard, Model TC/1, 60 wide, 15 extended apron feed condenser and reserve, which feed the card, 2-cylinder, can changer, which takes cans 26 diameter x 40 high, holds 3 cans, automatic doff, with control panel
(1) Machine M-32, S/N 32308, year 1997
(1) Machine M-35, S/N 32309, year 1998
The TURBOCARD is used for the production of very even slivers for Open End spinning, friction spinning and pile fabrics and for the production of webs for medical use.
The card configuration, in standard working width of 1520 mm, consists of:
- Automatic volumetric chute feed or automatic gravimetric hopper feeder;
- Entry section with feed roll and shell plate or with feed roller pairs depending on fibre length;
- Carding swifts with worker/stripper pairs or fixed and self-cleaning carding sectors;
- Cleaning and blending rollers with or without worker/stripper pairs;
- Delivery section designed for single sliver (from 10 up to 18 gr/m), double sliver (from 3 up to 6 gr/m each sliver) or very even web.
Can coilers of different dimensions with automatic can change.
TURBOCARD opens, cleans, blends and parallelizes short and medium length fibres, new and/or regenerated.
The different configurations according to the relevant applications consist of:
1) Single card with one carding swift;
2) Double card with two carding swifts;
Sliver speed 80 to 300 m/min depending on products.
n/a
1
Fabcon Open Width Compactor, 82" wide, Year 1996, consisting of:
Metal detector, Fabcon pneumatic air guides, E&L lattice opener with electronic photo cell detector, operators platform, overfeed system, Tandematic edge uncurlers, pneumatic edge guide detection system, pin frame horizontal, 7 turn around, 15 entry, opens the fabric, compact section and 2-roll center wind take-up, Serial Number 9619
n/a
1
Bierrebi cutting machine year 1994/95 consisting of:
A) DIR Model 855 (2 positions) yr. 1994, S/N 985501254, 380Volt /3 phase/60 cycle, 2 Kw.
B) LTE Model 208 yr. 1995, S/N 920800455, 36-1/2 wide, 220Volt /3 phase/ 60 cycle, 10 Kw, with patterns.
n/a
1
Evac Vacuum Slot-Extractor Dry, with vacuum pump and 25 HP motor
n/a
2
A-Frames Rotation units
n/a
1
Menzel Electric A-Frame Winder, Type 90SBE, S/N 01164, year 1994, 3 HP Drive Motor.
n/a
2
Brazzoli Single Port Atmospheric Jet Dye Machine, Model Camel Dyeing 50, Year 1992, 80 lb capacity. Single strand, complete with pump, motor, heat exchanger, add tank, (2) mix room drop tanks, lint filter, load/unloading reel, Sato Model PC 3100 Controller.
(1) Machine# 27 S/N 1259
(1) Machine# 28 S/N 1260
n/a
1
Gaston County Sample Dye Machine, 1-port, 80 lb capacity, S/N G9401668, year built 1994, N.B.# #24332, with heat exchanger, pump, inverter drive, motor and GC Model 6000 controls
n/a
1
Gaston County Jet Dye Machine, 1-port, S/N AT940211, year built 1994, N.B.# 24465, 500 lb. capacity, with heat exchanger, pump, inverter drive, motor and GC Model 6000 controls
n/a
1
Terrot Circular Knitting Machine, Model MK 7, year 1999, S/N 4620-50185, 30 diameter, 18 gauge, 42 feed, 480 volts, full electric jacquard
n/a
2
Comet Napper, 78" Wide, Double Action, 32 Rolls, Type: CYGNUS-X1, Exit Folder.
(1) Serial Number 31D6320
(1) Serial Number 31D6356
n/a
1
Set of two Lafer Nappers consisting of:
A) Napper M-65, Model Gri 124c, year 2000, 2 meters wide, with hook and straight wire, 24-rolls, 3-scroll roll driven entry, S/N 10GR10558, with plaitor
B) Napper M-66, Model Gri 124c, year 2000, 2 meters wide, with hook and straight wire, 24-rolls, 3-scroll roll driven entry, S/N 10GR10557, with Tandematic plate guide
C) Fabric starts from M-66 and finishes with M-65 because M-65 has a plaitor, M-66 has Tandematic plate guide
D) Collection System
n/a
1
Baler (W18), Horizontal, Model: 44-S-20HP575, Serial #: 997091, Hopper Dimensions: 54-1/2"h X 54"w
2570
1
Homogenizer, 25 HP, 41" shaft lenght, 230/460 volts, 60 Hz, 62.0-31.0 amps, 3 phase, P28G1215A-G2-SM/MS 2303
2619
1
In -Line inspection machine which includes the following:
A) 1 - Compensator
B) 1 - Back light and overhead light, 80 wide
C) 1 - Operators platform
D) 1 - Set of scroll rolls to keep the fabric open
E) 1 - Center guiding light
F) 1 - Inspection board
G) A-Frame, Center and surface winder
H) All motors and controls
2645
1
Menzel Brush Machine, type 78 BR, S/N 01091, year 1984, 4 brush roll, roll size 80"
3344
1
Homogenizer, 7.5 HP, 440 volts, 46" shaft length
3468
1
Vertical Laquer coating machine, made by Johannes Zimmer, Type RSL-87, S/N 06164, year 1991, 158" long
3828
1
Mahlo Weft Straightener Type RFMC-94H, FAB Nr. 23/834H/10193, JAHR 9.91, 550 Volt, 1.81 Amp, 3 ph, 60 Hz. (7) SS Rolls 4" dia. x 80" wide, (1) SS Roll 5" dia.x 80" wide, (2) Rubber Bow Rolls 4" dia. x 80" wide
3844
2
Tubetex Dryer Belt, 70" wide x 19' 1" long
3845
1
Tubetex Dryer Belt, 70" wide x 21 long
3874
1
Set of Specialty Company Air Guiders, 18 wide rolls with bridge; Right: Model 18, S/N 158, Left: Model 18, S/N 158. Bridge: 76 working width
3879
1
Artex Group Bias Slitter Type MTK 10AC-R40, made in Japan, S/N 771725
3881
1
Milnor Sample Washer Extractor, stainless steel construction, 30 diameter x 16 deep basket, 25 lb capacity. New controls. Motor: 3/4 HP, 1740 rpm, 60 Hz, 115 Volt, Type K Model# 72853BYG1, S/N 39D148
3917
1
Fail Safe Inc. Recovery System, Vacuum pump and slot. Motor: Marthon Type TFS, 25 HP, 1760 rpm, 460 Volt, 84 Amp, 60 cycle, 3 phase, S/N n/a. Nash Pump size SC-4, Test No. 9341278, 1170 rpm, 80 SS Slot.
* Hole on top of Heat Exchanger
3920
1
Homogenizer, 7.5 HP, 36 shaft length, Frame 215C, 400 Volts, 60 Hz, 3 phase, 3600 rpm, S/N 404/588
3934
1
Vanwyck Color Strainer with elevator. Elevator motor S/N 28372B14 Type RDA 90ES74, 575 Volt, 60 Hz, 0.37-0.55 Kw, 1.7/1.36 Amp, 1728/850 rpm (No HP). Elevator can go up to 7 feet. Dye tank door size 27 wide x 39 high, stainless steel. (2) Tank 24 wide x 30 high with wish ring, 1 drain hole. Pump motor: 200/265 Volt, 4.9/8.5 Amp, 2.2 Kw, 60 Hz, Mo 40529SF
5302
2
Johannes-Zimmer End Ring Gluer, type RSEK/B, year 1988, 162" lenght, 200 volts
(1) Lot# 5302, (1) Lot# 5303 each one with S/N 86076
5389
1
Gessner Saber shear, S/N SAB22, 144 wide roll, 144 knife, 230 Volts, 3 phase, 60 cycle. CEIA metal detector, S/N 94115, 220V/3/60
5408
2
Set of Specialty Company guiders, 9" rolls, bridge 87", max. cloth width 72"
(1) Lot # 5408 Right MFR.# N121 Model 45, Left MFR.# P482 Model 45
(1) Lot # 15409 Right MFR.# P263 Model 45, Left MFR.# M569 Model 45
5445
1
Rousselet extractor - Rapide 150, type SCPC-120TE, S/N 150284, year 1977, max. load 100 kg, 47" dia. x 19" depth. motor- 40 HP, 575 Volts, 1760 rpm, 19 amps, 60 Hz, 3 phase. With heat exchanger and control panel
5455
1
Parkinson 3-roll Batcher, #84-006, 101" wide, steel rows (Knurled) 10" diameter, will make 36" diameter roll, transfer, auto doff, serrated blade, motor with gear reducer chain and sprocket.
Motor: Drive/Reliance 7.5 HP D/C 1750/2300 rpm, 240 Volts, 27 Amps, FR/B1812ATCZ, Field Data 240 Volts, Hot Amps 99/48 ID# T1R81011C, code C. Gear Box: Eurodrive Type S 08AP Ratio 14.9 Torque 6800 in. lbs. Class I Mtg Pos. P3B
5456
1
Menzel 4 Roll cradle let off, 110" wide x 8 Ό Ψ rolls.
5503
1
Zimmer Rotary Screen Printing Machine Type RM IIb/6, year 1887, overhauled in 2002 as follows:
- Technical Data: 8 colors (Can add up to 12 colors), 184cm (72) max. printing width, 189 cm (74) max. cloth width, 64-102 cm (25-40) repeat range, equipped for repeat: 64 cm (25) - 81.28cm (32), Johannes Zimmer B end rings take-up system, right-operation side, left-color pipe removal side.
- Fabric Quality: Single width feeding of woven and knitted goods
- One Cloth Feeding device Type WER-II-PA suitable for woven and knitted goods
Operation Data: Service voltage 3 x 440/460 V 60 cycles, Control voltage 220 V 60 cycles, Average power consumption 90 KW
- One Rotary Screen Washer Type SW-B2
- One End Ring Glueing device, Type RSEK, with supporting rings each for 64cm (25)
5577
1
PMC Single Screen Washer, Model SSW-8X72, S/N 96-1502, with (2) brushes 72 long x 8 diameter
5610
1
Tester / Quickwash Plus / Fabric
shrinkage tester
Quickwash Plus fabric shrinkage tester,
washer & dryer. Washer size: 10 dia. x 6 deep. 110 Volts.
5761
16
A-Frames 80 wide x 16 diameter, 48 wide at base, 48 from floor to center, (4) 10 diameter casters, male adaptors
5762
8
A-Frames 130 Wide x 16 Diameter, 48 wide at base, (4) 10 diameter casters, male adaptors.
( 8) are 52 ½ from floor to center
5789
1
Menzel Inspection Machine, 140 wide, S/N 01152, Year 1995, consisting of:
A) Either a Center Wind Unwind or an A-Frame Unwind
B) Inspection Board, 149 wide, with an overhead light
C) Operators Platform
D) Railway Serger, with a Consew Model 15 portable bag closer
E) Hydraulic Lift Table (Scissor Lift), 8-1/2 long x 48 wide, off the floor, will go to about 48
F) Hydraulic Drive, variable speed
*Will have to make center wind take-up
Hydraulic 7.5 HP motor, Cat No. CM3710T, Spec 37A02W452, Frame 213TC, 208/230/460 Volt, 21.5/20/10 Amp, 3 ph, 60 Hz, 1725 rpm.
5790
1
Menzel Inspection Machine, consisting of:
A) Either a Center Wind Unwind or an A-Frame Unwind
B) Inspection Board, 149 wide, with an overhead light
C) Operators Platform
D) Railway Serger, with a Consew Model 15 portable bag closer
E) 2-Roll Menzel Surface Winder, 140 face, with edge guide, Type 140WS No. 01564, yr. 3/93
F) Hydraulic Lift Table (Scissor Lift), 8-1/2 long x 48 wide, off the floor, will go to about 48
G) Hydraulic Drive, variable speed
Hydraulic 7.5 HP motor, Cat No. CM3710T, Spec 37A02W452, Frame 213TC, 208/230/460 Volt, 21.5/20/10 Amp, 3 ph, 60 Hz, 1725 rpm.
Unwind 7.5 HP Motor, Cat CEM3770T, Spec 07H050W721, Frame 213TC, S/N F0406296240, 230/460 Volt, 19.6/9.6 Amp, 3ph, 60Hz, 1770 rpm.
5792
2
A-Frame Dolly 10F5, Type RJ.
S/N 04814, 1086
5807
1
Weko Biel AG Conditioning Unit, W-52896-B, Type RF-AQUAPAC.2, Year 1992, 220 Volt, 60 Hz, 3 Phase
5823
1
Cradle / Menzel / 80 wide
Menzel Cradle Type 80 US Ser. 82230, year
5/92. 2- Steel Rolls 80 wide x 12 ½ dia. , 1-Steel Roll 80 wide x 4 dia.
Motor: 3 HP, Cat No. CDP3603, Spec 36P1342507, Frame 184 TC, Ser S11/92,
Type PM3649P, 14 Amp, 180 Volt
|
5824 |
1 |
Dyeing Printing & Finishing |
|
Guider / Specialty / 80 working width Set of Specialty Guiders 18 wide. Right: Model 45, MFRS V878, Left: Model 45 MFRS L077. Bridge working width 80 |
||
|
5827 |
1 |
Dyeing Printing & Finishing |
|
Vacuum Brush / Kalin / 99 wide, with collection box Kalin Vacuum Brush, 99 wide, with collection box. Motor1: 15 HP, Type AM-132 MV20113, Ser 26412686, 480 Volt, 60 Hz, Code TEFC. Motor2: 7.5 HP, Type AM-112 MR2, Ser 39414925, 480 Volt, 60 Hz. |
||
|
5833 |
14 |
Dyeing Printing & Finishing |
|
Pump/ ARD / Air Color Pump ARD Air Color Pump Model 666100, Max. Working pressure: 120 psi, 8-Bar. |
||
|
5866 |
1 |
Dyeing Printing & Finishing |
|
|
Weft Straightener / Mahlo / 80 face, yr. 1997 Mahlo Weft Straightener, Type MFRC-94H, 80 face, year 12/1997, S/N 30/6344H/12998. 480 Volt/3/60, 4 optical eyes. *All is mounted on Frame work to use behind the Tenter Frame |
|
|
5867 |
2 |
Yarn Manufacturing |
|
Foamer / Foamer head Foamer Head, No tag (1) Lot# 05867 (1) Lot# 05868 |
||
|
5895 |
1 |
Lab Equipment |
|
|
Light / Datacolor International / Tru Vue 2, Lab dye Datacolor International Lab Light, Tru Vue 2. Part# 1080-0049, 110 Volt, 145 Watts. S/N 991397 |
|
|
5900 |
1 |
Lab Equipment |
|
|
Dye machine / Ahiba / Lab Dye Ahiba Lab Dye Machine, Tag#1: Type PM.03, Nr. 83122, 3.320 Volt, 15 Amp, 6600 Watt, 60 Hz. Tag#2: Type TC111, Nr. 0983076, 220 Volt, 1.6 Amp, 60 Hz |
|
|
5944 |
1 |
Inspection |
|
|
Inspection Machine / Lameccanica / 80 wide Lameccanica Inspection Machine, S/N 1360948350, consisting of: A) Square Bar Let-Off, 80 wide B) Scroll Roll C) 2 Compensators D) Inspection Board, with Trumeter, variable speed, forward and reverse E Operators Platform F) 2-Roll Surface Winder, with edge guide, can cut out samples and also can do a finish roll up to about 15 diameter, automatic taping system once the rolls are finished G) 2-Identical Drive motors Type CPVR 100AS, 1.84 HW, 2.5 HP, Giri/1 3000, Armatura V180, Serv. S1 |
|
|
5947 |
1 |
Dyeing Printing & Finishing |
|
A-Frame Tugger / Menzel / yr. 1999 Menzel A-Frame Tugger Type RJ04, S/N 1242, Year 1999 |
||
|
5948 |
2 |
Dyeing Printing & Finishing |
|
A-Frame Tugger / Menzel / yr. 2006 Menzel A-Frame Tuggers, Type HRJ05, year 2006 S/N 1400 & 1397 |
||
|
5950 |
1 |
Dyeing Printing & Finishing |
|
Mercerizer Chain / M&W / Used M&W Used #48 Mercerizer Chain (2) boxes w/360 links each = TOTAL 720 links |
||
|
5951 |
1 |
Dyeing Printing & Finishing |
|
Tenter Chain / M&W / Reconditioned M&W Tenter Chain 300 Not Spring Loaded M&W 300 Tenter Chain Reconditioned not spring loaded - 270 Links M&W 300 Tenter Chain Reconditioned not spring loaded - 270 Links TOTAL 540 Links M&W 300 Tenter Chain Reconditioned not spring loaded (350) tops loose (60) bottom loose (75) tops loose (63) bottom loose Shop Order No. 36054 |
||
|
5952 |
1 |
Dyeing Printing & Finishing |
|
Tenter Chain / M&W / Reconditioned M&W Tenter Chain Reconditioned 2001s Spring Loaded Closed 80 Links 86 Roller Assemblies 9 Connector Links 10 Clips 5xPins M&W 2001s Spring Loaded Closed 270 Links M&W 2001s Spring Loaded Closed 243 Links M&W 2001s Spring Loaded Closed 270 Links M&W 2001s Spring Loaded Closed 225 Links TOTAL 1008 Links Shop order No. 36391 |
||
|
5953 |
1 |
Dyeing Printing & Finishing |
|
Tenter Chain / M&W / Reconditioned M&W Tenter Chain Reconditioned 300s Spring Loaded closed M&W 300 Spring Loaded Closed 288 Links M&W 300 Spring Loaded Closed 288 Links M&W 300 Spring Loaded Closed 116 Links M&W 300 Spring Loaded Closed 288 Links TOTAL 980 Links Shop order No. 36654 |
||
|
5954 |
1 |
Dyeing Printing & Finishing |
|
Mercerizer Chain / M&W / Reconditioned M&W Mercerizer Chain Reconditioned M&W 48 with Diversified Bottom 189 Links M&W 48 with Diversified Bottom 189 Links M&W 48 with Diversified Bottom 135 Links M&W 48 Tops Pin & Links 99 M&W 48 Diversified Bottom 189 Link M&W 48 Diversified Bottom 189 Link TOTAL 990 Links |
||
|
5955 |
1 |
Dyeing Printing & Finishing |
|
Mercerizer Chain / M&W / Reconditioned M&W Reconditioned 48 Mercerizer Chain 89 Tops Only 4 Bottom Only M&W 48 Mercerizer Chain 99 Links M&W 48 Mercerizer Chain 250 Links M&W 48 Mercerizer Chain 250 Links M&W 48 Mercerizer Chain 250 Links TOTAL 849 Links |
||
|
5980 |
1 |
Lab Equipment |
|
|
Tester / Raitech / Quickwash Plus fabric shrinkage tester Raitech Quickwash Plus wash tester. Washer size: 6 deep x 9 dia. 110 Volts. US Patent No. 5,450,642. EPP 93,910,491,5 |
|
|
5984 |
1 |
Dyeing Printing & Finishing |
|
|
Weft Straightener / Mahlo / 80" wide Mahlo Weft Straightener Type RFMC-94H, FAB Nr. 23/684H/10210, JAHR10.91, 550 Volt, 1.81 Amp, 60 Hz, 3ph. Rolls: (7) SS rolls 80 wide x 4 dia, (2) Bow rolls 78 wide x 4 dia. |
|
|
5985 |
1 |
Dyeing Printing & Finishing |
|
|
Weft Straightener / Mahlo / 88" wide Mahlo Weft Straightener Type RFMC-94H, FAB Nr. 21/634H/8649, JAHR 2.93, 550 Volt, 1.81 Amp, 60 Hz, 3ph. Rolls: (7) SS rolls 88 ½ wide x 4 dia, (2) Bow rolls 86 wide x 4 dia. |
|
|
5994 |
1 |
Lab Equipment |
|
Tester / Scott / Tensile tester, Lab equipment Scott Model J Wall Mounted Tensile Tester, S/N 10AD-3, pneumatic jaws. 120 Volt, 60 HZ, 1 ph |
||
|
5995 |
1 |
Lab Equipment |
|
Tester / Raitech / Quickwash Plus, fabric shrinkage tester Quickwash Plus, made by Raitech Inc., US Patent No. 5,450,642. EPP 93,910,491,5. 120Volt AC. Ariston hot water heater with unit, Model P155, S/N 971121, 150 psi, KPA 1034, 11 Amp, 1 ph, 120 Volt AC, 1350 watt |
||
|
7122 |
1 |
Dyeing Printing & Finishing |
| Pad / Kuster / 2-Roll 79 w,
with drive and Hydraulic Unit Kuster 2-Roll Dye Pad. Rolls are Rubber/Rubber side by side, 79 wide x 8 diameter (expandable). With: (2) Immersion rolls, (1) Top roll, (1) Side roll, (1) bow roll. Complete, with drive and Hydraulic Unit. Drive: 20HP, 240 Volts, 1750/2300 rpm, Arm Amps 70.5, Fld Amps 1.78/1.2, Fld Ohms 23C97, Type GD 259ATC, S/N HY8-719-HY. Marked as #1 |
||
|
7124 |
1 |
Dyeing Printing & Finishing |
| Pad / Kuster / 2-Roll 79 w,
with drive and Hydraulic Unit Kuster 2-Roll Dye Pad. Rolls are Rubber/Rubber side by side, 79 wide x 8 diameter (expandable). With: (1) Immersion roll, (2) Top roll, (1) Side roll, (1) bow roll. Complete, with drive and Hydraulic Unit. Drive: 20HP, 240 Volts, 1750/2300 rpm, Arm Amps 70.5, Fld Amps 1.78/1.2, Fld Ohms 23C97, Type CD259ATC, S/N RY-8-128-54. Marked as #3 |
||
|
7125 |
4 |
Dyeing Printing & Finishing |
| Roll / For Kuster Dye Pad,
rubber/rubber, 79 wide Roll for Kuster Dye Pad, Rubber/Rubber, 79 wide x 8 diameter |
||
|
7128 |
1 |
Inspection |
| Inspection machine /
Lameccanica / 128 wide, yr. 2002 Lameccanica Inspection Machine, consisting of: A) Unloading Table, 120 wide x 5 F.B. B) Split Cradle, 126 wide, with (7) rollers 4 diameter, the other side only has (4) (need to add some rollers) C) Lameccanica Inspection Machine, Model LM37/02, Type LM84F/P, S/N 2098028414, year 2002, 128 wide, 480 volt, 3 phase, 60 cycle, 6kw D) Lighted Backboard with an overhead light E) Yardage Counter on one side, controls are in the center, forward and reverse, variable speed F) Operators Platform G) 2-Roll Surface Winder, 128 wide, with edge guide H) Doffs and slides onto a Conveyor, 30 long x 12 wide, driven |
||
|
7129 |
1 |
Dyeing Printing & Finishing |
| Open Width Foam Finish &
Bulking Machine / Santex Santa-Soft / For Pile Fabric, Mach #4 Open Width Foam Finish & Bulking Machine for Pile Fabric (Mach. #4) (Santex Santa-Soft Finishing Equipment), consisting of: A)Metal Unloading Table, 60 wide x 107 wide B)4-Roll Cradle, 72 wide, with 12 diameter rolls C)Stainless Steel Scray, 72 wide D)Santex Santasoft 2-Compartment Dryer, 16-1/2 long x 78 wide, gas heated, with steam injection, 4-chamber, single pass, (2) exhaust circulating fans, 20 HP each E)Scray F)Santex Levelling & Steaming Pin Tenter Frame, goes out to 84 wide, 30 long, steam section, cooling section G) Scray H) Inspection Frame I) 2-Roll Wind-Up |
||
|
7130 |
1 |
Dyeing Printing & Finishing |
| Open Width Foam Finish &
Bulking Mach. / Santex Santa-Soft / For Pile Fabric, Mach #5 Open Width Foam Finish & Bulking Machine for Pile Fabric (Mach. #5) (Santex Santa-Soft Finishing Equipment), consisting of: A) Yale Electric Hoist B) Metal Unloading Table, 60 wide x 107 wide C) 4-Roll Cradle, 72 wide, with 12 diameter rolls D) Stainless Steel Scray, 72 wide E) Set of Hydralign Guiders F) Single Roll Brush, with collection unit G) Spray Foam Unit H) Set of 1 Driven Roller I) Santex Santasoft 2-Compartment Dryer, S/N 5568, 156 long x 78 wide, gas heated, with steam injection, 4-chamber, single pass, (2) exhaust circulating fans, 20 HP each J) Scray K) 2-Roll Driven Scroll Rolls, 80 wide L) Operators Platform M) Santex Levelling & Steaming Pin Tenter Frame, S/N 5569, working width 80, goes out to 84 wide, 30 long, steam section, cooling section N) Scray O) Operators Platform P) 2-Roll Surface Winder Q) A/C Inverter Drive |
||
|
7131 |
1 |
Lab Equipment |
| Pad / L&W / Lab Pad, 14 w L&W Lab Pad with Reliance variable speed Control 0-10, 14 wide, rubber/stainless rolls, 5 diameter, with a dip pan and feeds into a Infrared Pre-dryer, with (4) infrared heaters per side, total of 8 heaters. 240 Volts, 60 Amps, 3 phase |
||
|
7132 |
1 |
Yarn Manufacturing |
| Air Compressor / Ingersoll
Rand / 50 HP Ingersoll Rand Air Compressor Model SSR-EP50SE, Capacity 194 CFM, S/N G4288U95348. Rated Operating Pressure 125 psig, max. Discharge Pressure 128 psig, max. Modular Pressure 128 psig, Nominal drive motor 50 HP, Nominal fan motor 3 HP, Total Package Amps 137/69, 230/460 Volts, 3 phase, 60 Hz, Control 120 Volt. |
||
|
7143 |
1 |
Yarn Manufacturing |
|
|
Autoclave / Xorella /
Electrically heated, yr. 1993 Xorella AG Model Contexxtor Yarn Conditioner, 84 x 98, S/N 10255, year 1993. Vessel: Bendel Corp., medium steam, +1/-1 bar working pressure 115 deg. C. working temperature, 11,665 liter volume, equipped with push button control, electrically heated el. 150 KW Drive Motor: Baldor Frame 284T S/N 293-C, 25 HP, 575 Volts, 25.5.Amp, 3 ph, 60Hz, 1760 rpm. Pump: Sterling, LPHR 55320BN117020, S/N 098-510108-10, STK 906213 |
|
|
7144 |
1 |
Yarn Manufacturing |
|
|
Autoclave / Xorella /
Electrically heated, yr. 1992 Xorella AG Model Contexxtor Yarn Conditioner, 84 x 98, S/N 10226, year 1992. Vessel: Bendel Corp., medium steam, +1/-1 bar working pressure 115 deg. C. working temperature, 11,665 liter volume, equipped with push button control, electrically heated el. 150 KW Drive Motor: Baldor Frame 284T S/N 5920, 25 HP, 575 Volts, 25.5.Amp, 3 ph, 60Hz, 1760 rpm. Pump: Missing |
|
|
7146 |
1 |
Dyeing Printing & Finishing |
| Weft Straightener / Mahlo /
79 wide Mahlo Weftstraightener Type RFMC-10A, FABRI NR. 25/684/30464, JAHR 11.01. 480.3 Volt AC, 3.62 Amp, 60 Hz. Rolls: (7) SS Rolls 79 ½ x 4 dia. (2) Bow Rolls 79 wide x 4 dia. |
||
|
7742 |
1 |
Knitting & Hosiery |
| Knitting machine / Orizio /
12 diameter, yr. 2001 Orizio, Model CMO/C, Ser. No. 1025963, year 2001, 12 diameter, 20 cut, 24 feeds, with Memminger tape feed and side creel. Machine# 285 |
||
|
8049 |
1 |
Yarn Manufacturing |
|
|
Winder / TCI / 100
positions, yr. 1998 TCI Winder, Model M06, S/N 199, year June 1998, 100 positions, 50 positions per side, 6" traverse, cone take, 240V/3/60 motor, 7" Bakelite drum, electronic slub catcher, wax attachment, disc tension, independent drive on each side, rewinder with floor creel, overhead cleaning |
|
|
8050 |
1 |
Yarn Manufacturing |
|
|
Winder / TCI / 80 positions,
yr. 1997 TCI Winder, Model L06/L10, S/N 193, year September 1997, 80 positions, 40 positions per side, 40 positions are 6" traverse, 40 positions are 10" traverse, cone take up, 240V/3/60 motor, electronic slub catcher, wax attachment, disc tension, independent drive on each side, rewinder with floor creel, overhead cleaning |
|
|
8094 |
1 |
Lab Equipment |
| Pad / Sample Pad / 16 ½
wide Sample Pad 1-Rubber Roll 16 ½ wide x 4 Ό dia., 1-SS Roll 16 ½ wide x 4 Ό dia. Motor (tag unreadable) |
||
|
8474 |
1 |
Yarn Manufacturing |
| Air Compressor / Kaeser /
Unit consisting of 1-Air Compressor 50 HP & 1-Kaeser Dryer Lot# 8474 Kaeser Air Compressor No. 1, Model BS61, year 1996, 200 psig, 225 cfm, 3 phase, 50 HP, 460 volt, S/N 5101993, total of 27,776 hours. With: Lot B0013-A (1) Kaeser KRD Dryer, Model KRD500, S/N 0365-2-9602-22K, rated at 500 scfm, 100 psi @ 100 deg. F., 460 volt, 3 phase, 60 cycle #1 Holding Tank, N.B. 140953, MAWP 165 psi @ 450 deg. F., MDMT 20 deg. F. @ 165 psi, HDT.184 SH.227, year 1996 #1 Oil Mist Eliminator, Model OME500, S/N HI537389001001K, certified by Hankison Intl. Div., MAWP 200 psi @ 300 deg. F., MDMT 20 deg. F. @ 200 psi, S/N 15411, year 1995 #1 has no Air Compressor Waste Oil Remover |
||
|
9359 |
1 |
Lab Equipment |
| Compensator / 80 wide Compensator with Tension Rolls 90 wide, 3 dia. Compensator Rolls: 80 wide x 5 dia., with (3) SS Rolls 80 wide x 6 dia., and (1) set of 18 guiders 96 working width |
||
|
9360 |
1 |
Dyeing Printing & Finishing |
| Wash Box / Morrison / 84
wide, with nip stand Wash Box & Nip stand. - Morrison Wash Box year 1994, S/N T896, 90 wide x 66 long x 59 high. Rolls: (12) SS Roll 84 wide x 6 dia. - Nip stand: (1) Rubber Roll 84 wide x 12 dia., (1) Steel Roll 84 wide x 12 dia., (1) Bow Roll 84 wide x 12 dia. Nip motor Model ANF215THTS80388RL, 10 HP, 230/460 Volt, 13/6.5 Amp, 1750 rpm |
||
|
9361 |
1 |
Dyeing Printing & Finishing |
| Wash Box / 84 wide, with
air pump, nip stand & compensator Wash Box, with air pump Nip stand and compensator. - Wash Box: 90 wide x 60 long x 59 high. Rolls: (12) SS Roll 84 wide x 6 dia. - Air Pump: 6661A3-344-C, B0230318, 120 8 - Morrison Nip Stand year 1991, S/N T-861: (1) Rubber Roll 84 wide x 12 dia., (1) SS Roll 84 wide x 12 dia., (1) Bow Roll 72 wide x 4 dia. Nip motor Model AVF215THTS8038BRL, 10 HP, 230/460 Volt, 3 ph, 60 Hz, 1775 rpm, Type TTS - Compensator: (1) SS Roll 84 wide x 6 dia. Lot# 09361 & 9362 |
||
|
9363 |
1 |
Carpet |
| Wash Box / 84 wide, with
nip stand & compensator Wash Box with Nip stand and compensator. - Wash Box: 90 ½ wide x 84 ½ long x 71 high. Rolls: (27) SS Roll 84 wide x 6 dia. - Morrison Nip Stand year 1991, S/N T-692. Rolls: (1) Rubber Roll 84 wide x 12 dia., (1) SS Roll 84 wide x 12 dia., (1) Bow Roll 84 wide x 12 dia. Nip motor Model AVH256THTNA8038EBL, 20 HP, 230/460 Volt, 30.0/15.5 Amp, 3 ph, 60 Hz, 1770 rpm - Compensator: (3) SS Roll 84 wide x 6 dia Lot# 09363 & 09364 |
||
|
9365 |
1 |
Dyeing Printing & Finishing |
| Nip stand / Morrison / 84
wide, with wash pan & compensator Morrison Nip stand year 1994 with wash pan and compensator, S/N T-897. Rolls: (1) Rubber Roll 84 wide x 12 dia., (1) SS Roll 84 wide x 12 dia., (2) SS Roll 84 wide x 6 dia., (1) Bow Roll 84 wide x 4 dia. Nip motor Model AVH256THTNA8038EBL, 20 HP, 230/460 Volt, 30.0/15.5 Amp, 3 ph, 60 Hz, 1770 rpm Compensator: (1) SS Roll 84 wide x 6 dia. |
||
|
9366 |
1 |
Dyeing Printing & Finishing |
| Wash Box / 84 wide, with
nip stand Wash Box with Nip stand. - Wash Box: 90 wide x 66 long x 64 high. Rolls: (12) SS Roll 84 wide x 6 dia. - Morrison Nip Stand year 1994, S/N T-898. Rolls: (1) Rubber Roll 84 wide x 12 dia., (1) SS Roll 84 wide x 12 dia., (1) Bow Roll 84 wide x 4 dia. Nip motor Model AVH256THTNA8038EBL, 20 HP, 230/460 Volt, 30.0/15.5 Amp, 3 ph, 60 Hz, 1770 rpm |
||
|
9367 |
1 |
Lab Equipment |
| Wash Box / 80 wide Open
wash box, with nip stand Open Wash Box with Nip stand. - Wash Box: 86 wide x 45 long x 28 high. Rolls: (6) SS Roll 80 wide x 6 dia., (2) SS Roll 80 wide x 5 dia. - Morrison Nip Stand year 1986, S/N T-770. Rolls: (1) Rubber Roll 80 wide x 12 dia., (1) SS Roll 80 wide x 12 dia., (1) SS Roll 80 wide x 6 dia., (1) Bow Roll 80 wide x 4 dia. |
||
|
9368 |
1 |
Dyeing Printing & Finishing |
| Nip Stand / Morrison / 84
wide, 2-compensator Morrison Nip Stand & 2-compensator - Morrison Nip Stand year 1994, S/N T-309. Rolls: (1) Rubber Roll 84 wide x 12 dia., (1) SS Roll 84 wide x 12 dia., (1) Bow Roll 84 wide x 4 dia. - (2) Compensator with 1-Roll each 84 wide x 6 dia., with (3) SS Rolls on stand with nip and compensator 84 wide x 6 dia. |
||
|
9369 |
1 |
Dyeing Printing & Finishing |
| Singer / Menzel / 80 wide Menzel Singer 80 wide with (4) SS roll 80 wide x 8 diameter, (3) SS Rolls 80 wide x 6 diameter & (4) Burner. No tag |
||
|
9370 |
1 |
Dyeing Printing & Finishing |
| Calender / B.F. Perkins /
3-roll, 100 Ton pressure, 85" w B.F. Perkins Calender, 3-roll, 100 Ton pressure - Top and Bottom rolls are Steel Chrome Plated 85" wide x 16" diameter and hot oil heated, Middle Roll and Spare Roll (new) are 85" wide x 21" diameter, filled. (2) SS Guide rolls 84 wide x 4 ½ diameter - Perkins Hydraulic System S/N H-6283-83 (For 100 Ton) - Perkins Fluid Heat Transfer Model FHTS-75-1, Hot Oil Circulating System Drive, AC, Motor 5 HP, 575V, 3-Phase, 60 cycle, S/N H-6322-83 - Calender Drive with (3) 5 HP motors, two are AC motors and one is DC motor. Main Drive is approx. 40 HP DC motor - Take Up DC Drive: 10 HP Motor, 1750/2300 rpm, 240 Volt, 1.40/.98 Amp, Type CD219ATC, Model 5CD153RC001B00E, S/N LT8-727-LT - Off-Nip Hydraulic Drive: AC, AC, 7 ½ HP, 575V, 3-phase, 60 cycle |
||
|
15470 |
20 |
Dyeing Printing & Finishing |
| Dry Can / 130 wide Dry cans with syphons, joints, traps, v-belt pulley and 5 HP DC motor per lot. (10) Morrison Teflon coated dry cans yr. 1984, 130 wide x 23 diameter x 90 psi. Lot# 15470 (10) Greenville Machinery stainless steel dry cans yr. 1983, 130 wide x 23 diameter x 125 psi. Lot# 15480 |
||
|
|
||
